Everything You Need to Know About Decal Grips for Guns
Decal grips have become an increasingly popular accessory among firearm enthusiasts, offering a practical solution for enhancing grip and control. These grips are typically adhesive-backed, textured overlays designed to improve handling by providing a better grip on the firearm. Whether you're a seasoned shooter or a beginner, decal grips for guns can significantly impact your shooting experience.
Uses of Decal Grips
Decal grips serve multiple purposes, catering to various needs and preferences:
Enhanced Grip: The primary function of decal grips is to provide a better grip on the firearm, especially when sweat, rain, or other environmental factors might cause the gun to slip from your hands.
Recoil Management: By offering a more secure hold, decal grips can help reduce felt recoil, making it easier to manage rapid-fire situations.
Benefits of Decal Grips
Improved Safety: having a firm positive hold of your firearm is paramount when it comes to safety, and is one of the most important, fundamental keys to safe and effective shooting. We know that a better grip on your gun makes it safer to shoot and can decrease the chances of accidental discharges and injury.
Improved Accuracy: A better grip leads to improved control, which can enhance your shooting accuracy. This is particularly important in high-stress situations where precision matters.
Non-Permanent Solution: Unlike stippling or other permanent modifications, decal grips can be easily removed without damaging the firearm, allowing you to revert to the original grip if needed.
Durability: High-quality decal grips are made to withstand the rigors of regular use, maintaining their texture and adhesion over time.
Versatility: These grips are available for a wide range of firearms, from handguns to rifles, making them a versatile option for gun owners.
Why Showgun Decal Grips Are Like No Other?
Pimp-Out Your Gun! Like no other decal grip on the market, our grips offer over 30 pre-designs to choose from and many of those designs offer muliple color choices, allowing gun owners to personalize their firearms according to their preferences.
Customization: Make your gun a “one-of-a-kind! We’ll take your idea from concept to creation. We'll take your brainchild and skin your pistol with our innovative Showgun decal grip custom fit to your pistol. https://showgungrips.com/products/custom-decal-grip
Comfort: Decal grips are designed to fit comfortably in your hand. The rubber-like feel is not only non-slip, but it won’t chafe or irritate your skin and also can reduce fatigue during extended shooting sessions.
Cost-Effective Upgrade: Compared to other grip modifications, our decal grips are a budget-friendly way to enhance the performance and aesthetics of your firearm, for a fraction of what it costs to customize your gun with a Cerakote finish or hydro dipping.
Installation of Decal Grips
Installing decal grips is a straightforward process that can be done at home with minimal tools. Here's a step-by-step guide:
- Remove the magazine and all ammunition and ensure the firearm is completely unloaded before proceeding with the installation.
- Make sure all outer surfaces of the unloaded firearm are clean and free of oil or grease.
- Before removing the backing paper from the grip kit, hold each piece up to the firearm to see where it will go and how it aligns.
- Start with the largest of the two pieces that will go onto the grip area of the handgun. Peel the decal off of the backing paper and apply it to the gun’s grip. Line it up around the mag release and the bottom edge of the frame. Then wrap the rest; aligning them with the edges and contours of the firearm. Try to avoid excessive touching of the adhesive side of the decal grip.
- Repeat step 5 for the rest of the grip kit. You can peel back up and re-align if need be.
- Use a hair dryer or heat gun to heat the grip, while pressing down all the edges. This will soften the adhesive and help it to mold into the textures of the gun surface. In colder temperatures longer and closer usage of hair dryers may be necessary.
- Continue to press down all the edges and into all the contours until the gun cools to near room temperature. Then wrap rubber bands or a small ace bandage around the frame to hold all the edges and flaps down while the adhesive cures.
ALLOW 24 HOURS FOR THE ADHESIVE TO FULLY CURE BEFORE USING.
Watch The Video For Installation
Bottom Line
Decal grips are a simple yet effective way to enhance the performance and comfort of your firearm. Whether you're looking to improve your grip, reduce recoil, or add a touch of personalization, decal grips offer a versatile and non-permanent solution. Their ease of installation and removal makes them an excellent choice for both novice and experienced shooters.
Frequently Asked Questions (FAQs)
Question: Are decal grips suitable for all firearms?
Answer: Decal grips are available for a wide range of firearms, including Glock, Smith & Wesson, Ruger, Springfield, Sig Sauer, Walther, Taurus, CZ, and Keltec handguns. And we also have Decal “trim-to-fit Grip Sheets” available for other applications such as rifles like AR-15, and covering other firearm accessories. https://showgungrips.com/collections/grip-tape-material
Question: Do decal grips affect the holstering of a firearm?
Answer: Generally, decal grips are thin and shouldn't interfere with holstering. However, sometimes the increased diameter and rubber-like surface can hinder the ease of holstering. it's recommended to test the fit after installation to ensure smooth operation.
Question: How long do decal grips last?
Answer: The lifespan of decal grips can vary depending on usage and environmental factors, but high-quality grips are designed to last through extensive use.
Question: Can decal grips be removed easily?
Answer: Yes, decal grips can be removed without leaving residue or damaging the firearm. This makes them a great option for those who may want to switch back to the original grip or try a different design.
Question: Are decal grips legal?
Answer: In most regions like the USA, decal grips are generally legal to use on firearms. However, checking local laws and regulations is always a good idea to ensure compliance.